Recording; Recording System; System Setup Menu Item; Default File Name - Fostex UR-2 Owner's Manual

Model UR-2 <Recording>

Recording

Recording system

The unit uses the FAT16 and FAT32 (FAT: File
Allocation Table) file system and supports the
most common BWF (Broadcast Wave File) file for-
mats.
You can make recording in stereo (L/R) or mono.
The unit uses the "1 take - 1 file" system.
The first time you make recording, the "BWFF"
folder is created on the root (the top level folder),
and a BWF file is created in the "BWFF" folder.
Regardless of FS/bit setting, all created files are
stored in the same ("BWFF") folder.
STORAGE
When the current storage device has any folder
other than the BWFF folder, a file is created in a
folder you select.
Recording time
The table below shows the approximate record-
ing time at each recording FS/bit setting on a
1GB SD card (or a USB memory).
Recording FS/BIT
STEREO
44.1kHz/16bit
48kHz/16bit
44.1kHz/24bit
48kHz/24bit
88.2kHz/24bit
96kHz/24bit
<Memo>: You can check the recording time of the
current storage device by pressing the [TIME] key
in the input monitor mode (see page 34).
BWFF
**********.wav
**********.wav
**********.wav
**********.wav
Recording channel
MONO
Setup before you start recording
Before you record signals from the analog line
input, digital input or microphone input, set
menu items in the "SYSTEM SETUP" and "MIC IN
SETUP" menus of the MENU mode appropriately.
The following tables show the default settings of
menu items in the "SYSTEM SETUP" and "MIC IN
SETUP" menus. By default, you can record an ana-
log source from the [ANALOG INPUT] connectors
at 44.1 kHz/16 bit stereo to the current storage
device (SD card or USB memory).
You can change the default settings if required.
See the following pages for details of each menu
item.
<SYSTEM SETUP menu items>
Menu item

Default file name

Recording source

Recording FS/bit
Recording channel
Maximum size of an audio file

Peak hold time

Reference level

<MIC IN SETUP menu items>
Menu item
MIC IN function
[MIC IN] key function
MIC IN function
during recording
Phantom power supply
-30-
Default
Scene name
+
Take number
Analog
44kHz / 16bit
Stereo
4 (GB)
3 sec.
-20dBFS
Default
Enable
On
Enable
Off