Playback In Memory Play Mode - Fostex UR-2 Owner's Manual

Playback in MEMORY play mode

When you select the MEMORY play mode, the unit
reads the play list information and shows the
MEMORY PLAY MODE screen as below.
If the list is not created, "CHAIN LIST
<Note>:
Empty!" is shown followed by the screen as be-
low. In such a case, create the play list and then
select the MEMORY play mode again (see page
46 for details about how to create the play list).
In the MEMORY play mode, you can perform in-
stant start of up to ten files in the play list from a
USB keyboard.
The memory numbers 1 through 10 in the MEMORY
PLAY MODE screen are assigned to the numeric keys
on the keyboard. Pressing a numeric key starts play-
back of the file set to the corresponding memory
number. Memory number 10 is assigned to the "0"
key.
For example, if you press the "4" key of the USB
keyboard, the file set to memory number 4 starts
playback instantly and the display shows the screen
as below. At the top of the screen, the playback
elapsed time is shown.
Unlike other play modes, the repeat func-
<Note>:
tion cannot be active in the MEMORY play mode.
Playback in TIMER play mode
When you select the TIMER play mode, the unit
reads the play list information and shows the
timer play screen something like below.
If the list is not created, "TIMER LIST
<Note>:
Empty!" is shown followed by the screen as be-
low. In such a case, create the play list and then
select the TIMER play mode again (see page 51
for details about how to create the play list).
In the TIMER play mode, the unit starts playback of
the files in the list. You may use this mode for ring-
ing the chimes at the fixed time.
The timer play is referenced to the in-
<Note>:
ternal realtime clock information. So you should
adjust the realtime clock correctly.
For details about how to adjust the realtime clock,
see page 23.
While the timer play screen as above is
<Memo>:
shown, you can preview the file to be played
back by pressing the [PLAY] key.
-45-
Model UR-2 <Playback>