Home Screen In Record Or Input Monitor Mode - Fostex UR-2 Owner's Manual

Model UR-2 <Names and functions>

Home screen in record or input monitor mode

7
6
5
1) Time information
During recording or in input monitor mode, the
current recorder position is shown.
Pressing the [TIME] key switches between the
time display and the remaining time display of
the storage device.
Also the record icon ( ) is lit in the top right of
the display during recording.
2) Margin
The margin of the input signal level is displayed
during recording or in input monitor mode.
The margin display can be reset by pressing the
[MRGN RST] key in shift mode.
3) Level meters
The input (recording) levels are displayed
during recording or in the input monitor mode
(see page 33).
4) Input source
The currently selected input source (
or ) is displayed. You can select
tal) or (Analog) using the "Select input"
item in the SYSTEM SETUP menu of the MENU
mode (Note that even if you select Digital, when
the unit does not lock to the digital input
signal, flashes quickly).
When turning on the [MIC IN] indicator by
pressing the [MIC IN] key,
page 34).
5) Sampling frequency/quantization bit
The Fs and bit information of the current file is
displayed. You can select the desired Fs and bit
using the "Record FS/bit" item in the SYSTEM
SETUP menu of the MENU mode (see page 74).
6) File format
The file format of the current file (BWF) is
displayed.
1
2
4 3
,
(Digi-
is selected (see
7) File number/file name
In the input monitor mode, "NEXT" is displayed
in the file number field, while the file name of
the next recording is displayed in the file name
field.
During recording, the current file number and
file name are displayed.
As with the file number shown on the Home
screen in stop or playback mode, the first
alphabetical character in a file number shows
the storage device where the current file is
recorded (such as A001, B001 and C001).
The file name format depends on the selection
of the "Default file name" item in the SYSTEM
SETUP menu of the MENU mode (see page 73).
• When Date is selected:
The internal realtime clock data when
recording starts (with ".wav", the file extension)
is set to the file name.
Example: B15h09m27s10aug2008.wav
• When Take is selected (default):
"Scene name + Take Number" (with ".wav", the
file extension) is set to the file name.
Example: SCENE_001.wav
• When Reel is selected:
"Reel number + File number" (with ".wav", the
file extension) is set to the file name.
Example: 12082008_001.wav
-18-