Page 1
8289665000 (499595) Model UR-2 supplementary manual <for version 1.20> With the software upgrade of the Model UR-2 to version 1.20, the following functions are added or enhanced. Among these functions, the newly added auto cue and auto ready functions will help you a lot when you use the UR-2 in the audio system for a stage or studio.
Contents Newly added auto cue function .......................3 Enabling the auto cue function ......................3 Setting the auto cue level ..........................4 Newly added auto ready function .....................5 Enhanced chain play list ........................6 Newly added scrub function for CUE point editing ...............8 Customizing the play mode options ....................9 Newly added “EP-CT1 mode”...
Newly added auto cue function About the auto cue function When the auto cue function is enabled, selecting a file using the file selection screen (or using the keys) automatically puts the unit in standby mode at the first point in a file where the signal exceeds a certain threshold or at the "BS$START"...
To exit the MENU mode after enabling the auto cue Setting the auto cue level function, press the [EXIT] key. In the following description, it is assumed that the "Auto <Note>: The "Auto cue" setting remains even if you turn cue"...
Newly added auto ready function About auto ready function The auto ready function works only in the single play mode. When the auto ready function is enabled, the unit locates to the beginning of the next file and enters standby mode after the unit finishes playback of a file. Note that when the auto ready function is disabled in the single play mode, the unit locates to the beginning of the current file and enters standby mode after the unit finishes playback of a file.
Enhanced chain play list The chain play list is used for the CHAIN SINGLE, CHAIN ALL or MEMORY play. With the new software version, you can insert a space file ("<SPACE>") between audio files in the chain play list. By inserting a space file between audio files, you can prevent the unit from starting unwanted playback by an accidental press of an adjacent numeric key.
Page 7
Press the [ENTER] key to save the play list. (To cancel saving the play list, press the [EXIT] key instead of the [ENTER] key.) The play list is saved and the display returns to the Home screen. <Memo>: The play list is saved to the folder in the cur- rent storage device as the "CHAINLIST.CSV"...
Newly added scrub function for CUE point editing The newly added scrub function allows you to fine-adjust a CUE point. While scrubbing, you can monitor the sound as well as viewing the waveform. This function is useful for editing the "BC$START" or "BC$END" point in the CUE list.
Customizing the play mode options About this function This function customizes the selectable play mode options for the [PLAY MODE] key. By default, pressing the [PLAY MODE] key selects the play mode from the seven available modes in the following order. With the new software, you can specify the play modes selectable with the [PLAY MODE] key so that the play modes you never use are not selected.
Newly added "EP-CT1 mode" item in the "Parallel setup" menu item The newly added "EP-CT1 mode" item selects the mode of the instant start controller (available soon) between "Normal" and "Instant". The instant start controller controls the UR-2 using parallel commands. Depending on "EP-CT1 mode"...