Precaution; Precautions On Installation - Fostex UR-2 Owner's Manual

Model UR-2 <Introduction / Overview>
Introduction
Thank you very much for purchasing the
Model UR-2 recorder. Read this manual and
follow all instructions before using this unit,
and retain it for future reference.
Precautions
• You can supply the power either from the
dedicated Fostex AC adaptor or external
battery. When you use an external battery, be
sure that the battery can stably supply the
rated power voltage.
• While the unit is accessing a storage device
(an SD card or USB memory) (i.e. during
recording or playback), do not turn off the
power or remove the device.
Otherwise, recorded data may be lost or the
storage device may be damaged. Make sure
that the unit completely stops accessing the
storage device and the access indicator is
unlit before you remove the device.
• Do not let water or other liquid, or metal
objects such as pins, accidentally enter the
inside of the unit because this may lead to
electric shock or damage. Should water enter
the inside of the unit, turn off the power,
unplug the AC adaptor, and consult your
dealer or the nearest FOSTEX service station.
• Do not drop the unit or give it a strong shock.
Doing so may damage the internal circuits,
display or panels. Handle the unit with great
care because it is a precision mechanical
device.
• Do not open the case or touch inside the unit
because of the danger of electric shock and
failure.
<About replacing the lithium battery>
The unit contains the internal lithium bat-
tery for running the internal clock. The
battery should be replaced approximately
every five years. To replace the battery,
ask your dealer or the nearest FOSTEX ser-
vice station. If the battery is not correctly
replaced, there may be a risk of explosion,
etc.

Precautions on installation

• Do not install the unit in the following
conditions.
* In an extremely hot or cold place
* In a moist place
* In a vibrated place
* In a dusty place
* In a strong magnetic field or near a device
which generates a magnetic field
* In the direct sunshine
* In the direct shower or rain
• When you mount the unit to an EIA rack, use
the appropriate mounting screws (note that
the mounting screws are not supplied with the
unit).
It is recommended to leave at least one empty
rack space above and below the unit for
reducing the amount of heat transferred.
R ES
PO WE PH ON
X
MA
MIN
Put the supplied
rubber feet on the
bottom of the unit
for slip-proof if
required.
-10-
M
AN TO
PH
IN
MIC
E
CU SET
MIC
R
SO
E/C UR MIC IN
R FIL X
/ EN TE NE XT MA
NU E F FW D MIN GA IN
ME CU X MIC
PR EV MA L
W MIN LE VE
EX IT RE UT
INP
Y AY
C RD RST PL
RE GN
MR OP
ST
RE C
0
E ABS END
TIM REC
PL AY
MO DE ER
T -2 CO RD
IFT RE PEA UR RY RE
SH AY MO
ED IT PL CK ME
DIS O RA
AY E SE L STE RE
TO PL FIL
AU
CT
EJE AD Y G SEL
RE STR
SD -2
ST -1
HO SD
B
US
PC
US B LY)
ON
(KY BD
PLAY
POWER SHIFT MODE TIME REC RDY EXIT
AUTO PLAY
EDIT REPEAT MRGN RST
PHONES
USB PC USB HOST EJECT REC STOP
(KYBD ONLY) FILE SEL DISPLAY
READY
SD-1 SD-2
SD-1 SD-2 UR-2
MIN MAX
STRG SEL STEREO RACK MEMORY RECORDER
ABS 0
REC END
PLAY
POWER SHIFT MODE TIME REC RDY EXIT
AUTO PLAY
EDIT REPEAT MRGN RST
PHONES
USB PC USB HOST EJECT REC STOP
(KYBD ONLY) READY FILE SEL DISPLAY
SD-1 SD-2
SD-1 SD-2 UR-2
MIN MAX STEREO RACK MEMORY RECORDER
STRG SEL
ABS 0
REC END
MENU / ENTER
PHANTOM
FILE/CURSOR CUE/LOCATE MIC IN
PREV CUE NEXT TIME EDIT MIC SET
PLAY REW F FWD
MIN MAX MIN MAX
INPUT LEVEL MIC GAIN MIC IN
MENU / ENTER PHANTOM
FILE/CURSOR CUE/LOCATE MIC IN
PREV CUE NEXT TIME EDIT MIC SET
PLAY REW F FWD
MIN MAX MIN MAX
INPUT LEVEL MIC GAIN MIC IN