Brother HL-7050 Service Manual page 94

CHAPTER 2 INSTALLATION AND BASIC OPERATION
(5) Insert the network board connector firmly into
the connector of the main controller board,
and then secure it with the two screws.
(6) Secure the metal plate with the three screws.
(7) Close the side cover.
(8) Connect one end of the Ethernet Cable to the network port of the printer.
(9) Plug the power cord into the AC outlet, and then turn on the power switch.
Print configuration page
Press the network test button for less than 5 seconds to print a configuration page.
Network port
Fig. 2-58
2-64
Fig. 2-56
Fig. 2-57