Brother HL-7050 Service Manual page 57

(2) Pull out the MP tray extension flap.
(3) Open the face up output tray.
(4) Pull out the face up output tray extension.
(5) When loading paper in the MP tray, make sure it touches the back of the tray and remains below
the limit mark.
NOTE:
Make sure that the neatly stacked paper is correctly seated on the MP tray, otherwise paper
may not be fed correctly, resulting in a skewed printout or a paper jam
Fig.2-42
Fig.2-43
Fig.2-44
Fig.2-45
2-27
HL-7050 SERVICE MANUAL