Brother HL-7050 Service Manual page 68

CHAPTER 2 INSTALLATION AND BASIC OPERATION
5.3 LCD Display
The display shows the current printer status. When you use the control panel buttons, the
display will change.
If you take the printer off-line, the display changes to show the selected emulation.
If any problems occur, the display shows the corresponding error message, maintenance
message, or call service message to prompt you to take an action. For more information
about these messages, see
5.3.1 Backlights
The backlight of the LCD shows the current printer status with the different colors and the light
indications (on, off and blinking).
Light indication
Off
Green
(General)
Red
(Error)
Orange
(Setting)
5.3.2 LCD message
You can choose the messages that display on the second line of the LCD message as shown
below.
Choose
CHAPTER 6
Meaning
The printer is off-line or in sleep status.
Ready to print
Printing
Warming up
Some problem has occurred at the printer.
Selecting menu
Setting reprint times
Pause
in the lower LCD menu of the SETUP mode.
NONE/PAGE/JOB
'TROUBLESHOOTING'.
2-38