Brother HL-7050 Service Manual page 84

CHAPTER 2 INSTALLATION AND BASIC OPERATION
5.5.10 Set IP address
--MENU--
INFORMATION
--MENU--
NETWORK
NETWORK
TCP/IP
TCP/IP
TCP/IP ENABLE
TCP/IP
IP ADDRESS=
IP ADDRESS=
192.0.0.192
IP ADDRESS=
123.0.0.192
IP ADDRESS=
123.45.67.89
IP ADDRESS=
123.45.67.89
Press the + button.
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
*
The last digit in the first part of the number is blinking.
Press the + or – button to increase or decrease the number.
Press the Set button to complete the IP address.
Repeat this process until you have set your IP address.
Press the Set button to complete the IP address.
An asterisk appears at the end of the display.
*
2-54