CHAPTER 2 INSTALLATION AND BASIC OPERATION
(6)
While pressing the paper guide release lever, slide the adjuster to fit the paper size.
!
CAUTION:
Do not touch transparencies that have just been printed because they are very HOT.
NOTE:
When placing paper in the MP tray, note the following:
When printing, the inside tray automatically rises to feed paper into the printer.
The print surface must be face up.
The leading edge (Top of the paper) must be placed inside first so it rests lightly against
the printer.
The top of the paper stack must be under the guides that are on both sides of tray.
Fig.2-46
2-28