Brother HL-7050 Service Manual page 221

3. PAPER PROBLEMS
When any paper related problem occurs, ensure that the paper used meets the recommended
paper specifications referring to
3.1 Paper Loading Problems
Problem
The printer does not
load paper.
The printer does not
load paper from the
multi-purpose tray.
The printer does not
load envelopes.
A paper jam has
occurred.
The printer feeds
multiple pages.
The printer does not
print to the face down
output tray.
The printed pages are
curled, so the face down
output tray cannot hold
the prescribed number
of sheets.
The printer does not
print.
subsection 3.6 'Paper' in CHAPTER
(1) Check that paper in the paper cassette is straight. If it is
curled, straighten it before printing. Sometimes it is helpful to
remove the paper, turn the stack over and put it back into the
paper cassette.
(2) Reduce the amount of paper in the cassette.
(3) Check that manual feed mode is not selected in the printer
driver.
(4) Check that the pickup roller or separation pad needs to be
replaced.
(1) Fan the paper, and re-install the paper firmly.
(2) Make sure the manual feed mode is selected in the printer
driver.
The printer can load envelopes from the multi-purpose tray. The
application software must be set up to print on the envelope size
being used. This is usually done in the page setup or document
setup menu of the software. See the software application manual.
(1) Clear the jammed paper referring to 'Paper jams and how to
clear them.'
(2) Check that the pickup roller or separation pad needs to be
replaced.
Check that the pickup roller or separation pad needs to be
replaced.
Close the face up output tray.
(1) Turn paper in the paper cassette over.
(2) Check that printer driver setting in Media Type into thicker
setting level than current setting.
(1) Check that the cable is connected to the printer.
(2) Check that the appropriate printer driver is selected.
6-11
HL-7050 SERVICE MANUAL
1.
Remedy