Brother HL-7050 Service Manual page 47

(3) Select the IP address of your printer and LPR, and then click the Next button.
(4) Click the Finish button.
*For Windows NT4.0 and Windows 2000/XP users:
The set up is now complete.
*For Windows 95/98/Me users:
After your PC has restarted, setup will be complete.
For Brother Peer-to-Peer network printer users (NetBIOS)
(1) Select "Brother Peer-to-Peer Network Printer", and then click the Next button.
(2) Select "Search from a list of available printers" or enter your printer IP address. Click the
Next button.
(3) Select the IP address of your printer and NetBIOS, and then click the Next button.
(4) Click the Finish button.
*For Windows NT 4.0and Windows 2000/XP users:
The setup is now complete.
*For Windows 95/98/Me users:
After your PC has restarted, setup will be complete.
3.4.3 Installing the driver for Macintosh
Connect the printer to your Macintosh & install the BR-Script PPD file
(1) Turn off the printer power switch.
(2) Connect the network interface cable to the printer, and then connect it to a free port on
your hub.
(3) Turn on the printer power switch.
For Mac OS 8.6 to 9.2 Users
(1) Put the CD-ROM into your CD-ROM drive.
(2) Double-click the Start Here! icon. Follow the instructions on the screen.
(3) Click the "Install Software" icon on the Menu screen. Follow the instructions on the
screen.
(4) Open the Chooser from the Apple Menu.
(5) Click the LaserWriter8 * icon, and then select BRN_xxxxxx_P1_AT. ** Click the Setup...
button. Close the Chooser.
* If the Apple Laser Writer8 Driver is not already installed on your system, you can download it
from http://www.apple.com
** xxxxxx are the last six digits of the Ethernet address.
The set up is now complete.
Fig.2-24
®
users only
2-17
HL-7050 SERVICE MANUAL