Brother HL-7050 Service Manual page 322

APPENDIX
APPENDIX 22.
The paper tray fitted to the printer is different from the service manual information for printers
shipped to Europe as follows:
(1) The paper tray supplied with the HL-7050 printer has a plastic rib on the paper tray cover
as shown below;
(2) The plastic rib is removed from the tray cover for the paper cassette supplied with the LT-
7000, (optional Lower Tray Unit) as shown below;
(3) If the optional LT-7000 Lower Tray Unit is installed onto the HL-7050 printer, it is
necessary to exchange the cassette supplied with the LT-7000 Unit with the upper
cassette already fitted into the printer. Install the cassette originally fitted in the printer into
the LT-7000 Unit.
Failure to do so will cause paper jams, as the paper cannot be fed from the lower tray to
the printer body because the plastic rib on the paper tray cover is blocking the paper path.
(4) For paper cassettes supplied as spare parts, the plastic rib has been cut off so that you
can use it as both an upper tray and lower tray.
PAPER TRAY INFORMATION (FOR EUROPE ONLY)
Paper tray
Paper tray cover
Plastic rib
Fig. A- 9
Cutting position
Fig. A- 10
A-28
Plastic rib