Brother HL-7050 Service Manual page 62

CHAPTER 2 INSTALLATION AND BASIC OPERATION
5.2 Panel Buttons Functions
7 control panel buttons (Go,
basic printer operations and change various printer settings.
Key
Go
Job Cancel
Reprint
+
-
Set
Back
5.2.1 Go button
The panel indications can be changed from the current status (MENU, ERROR and REPRINT
settings) by pressing the Go button once. For ERROR indications, the panel changes only
when the error is cleared.
Printing can be paused with the Go button. Pressing the Go button again restarts the print job
and clears the PAUSE. During PAUSE, the printer is in the off-line state.
NOTE:
If you do not wish to print the remaining data when the printer is in PAUSE, the job can be
canceled by pressing the Job Cancel button. Press the Go button to clear the PAUSE and
return the printer to the "Ready" state.
5.2.2 Job Cancel button
The processing or printing of data can be canceled with the Job Cancel button. The display
shows JOB CANCELING until canceling is completed. After canceling the job, the printer
returns to the READY state.
When the printer is in any state except receiving data or printing, the display shows "NO
DATA!!!" and the job cannot be canceled.
Job Cancel, Reprint, +, -,
Function
Exit from the control panel menu.
Reprint settings and Error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the reprint menu. (1-999)
Move forward through menus.
Move forward through selectable options.
Move backward through menus.
Move backward through selectable options.
Select the control panel menu.
Set the selected menus and settings.
Go back one level in the menu structure.
Set and Back) enable to control the
2-32