Brother HL-7050 Service Manual page 234

CHAPTER 6 TROUBLESHOOTING
F-3
User Check
(1) Check that the paper or other media is loaded into the paper tray correctly and that the paper
guides are not too tight or too loose against the paper stack.
(2) If using the manual feed slot, check how to load paper into the manual feed slot correctly.
(3) The paper cassette may be too full. Load paper below 27mm in depth.
(4) Check the paper used meets the recommended paper specifications.
F-4
User Check
(1) Check the paper used meets the recommended paper specifications. Both high temperature and
humidity will cause paper to curl.
(2) If the printer is used infrequently, the paper may have sat for too long in the paper tray. Turn over
the stack of paper in the paper tray. Also, try rotating the paper 180° in the paper tray.
(3) Try printing using the straight-through output path.
NOTE:
For no paper supplied as the cause of a malfunction, see
'MALFUNCTIONS' in this
Page skew
Curl or Wave
chapter.
'M-4 No paper supplied' in section 5
6-24