Changing The Administrator Username And Password - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

Setup

Changing the Administrator Username and Password

Changing the Administrator Username and Password

!
CAUTION
NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Use the Setup > Password page to update the administrator username and
password. You can keep the default username (admin) if you like. However, Cisco
strongly recommends changing the default password (admin) to a strong
password that is hard to guess.
The password cannot be recovered if it is lost or forgotten. If the password is lost
or forgotten, you have to reset the router to its factory default settings. Doing so will
remove all of your configuration changes.
• You must change the administrator password if you enable remote access
on the Firewall > General page.
• Before navigating away from this page, click Save to save your settings, or
click Cancel to undo them. After you change the username or password,
you will be required to log in with the new credentials when you select any
option in the navigation tree.
To open this page: Click Setup > Password in the navigation tree.
• Old Password: Enter the old password. The default password is admin.
• New Username: Enter a new username, if desired. To keep the existing
username, leave this field blank.
3
40