Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual page 56

NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Editing the Dynamic DNS Setup
The Edit Dynamic DNS Setup page appears after you click an Edit icon on the
Dynamic DNS page.
Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
From the DDNS Service list, choose your service. Then enter the information for
your account, as described below. To disable this feature, choose Disable.
• Username: Enter the username for your DDNS account.
If you have not previously registered a host name, you can click Register to
go to the DynDNS.com website, where you can sign up for free Dynamic
DNS service. Click the Sign up FREE link, and then continue through all of
the steps.
• Password: Enter the password for your DDNS account.
• Host Name: Use these three fields to enter the host name that you
registered with your DDNS provider. For example, if your host name is
myhouse.dyndns.org, then enter myhouse in the first field, dyndns in the
second field, and org in the last field.
The following read-only information appears:
• Internet IP Address: The current WAN IP address for the interface.
Because it is dynamic, this setting will change.
• Status: The status of the DDNS function. If the status information indicates
an error, make sure you have correctly entered the information for your
account with your DDNS service.
3
56