Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual page 169

Cisco QuickVPN for Windows
Using the Cisco QuickVPN Software
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
• Server Address: Enter the WAN IP address or domain name of the remote
router.
• Port for QuickVPN: Enter the port number that the QuickVPN client will use
to communicate with the remote VPN router, or keep the default, Auto.
• Use Remote DNS Server: When this feature is enabled, QuickVPN users
use the Remote DNS Server (provided by the QuickVPN Server) to resolve
the hostname of the computers in the remote subnet over a QuickVPN tunnel.
To save this profile, click Save.
If there are multiple sites to which you will need to create a tunnel, you can create
multiple profiles, but note that only one tunnel can be active at a time. To delete this
profile, click Delete. For information, click Help.
To begin your QuickVPN connection, click Connect. The connection's progress is
displayed in this order:
Network
.
When your QuickVPN connection is established, the QuickVPN tray icon turns
QuickVPN Status
green, and the
of the remote end of the VPN tunnel, the time and date the VPN tunnel began, and
the total length of time the VPN tunnel has been active.
To terminate the VPN tunnel, click Disconnect.
If you clicked Change Password and have permission to change your own
password, the Connect Virtual Private Connection
• Old Password: Enter your password.
• New Password: Enter your new password.
• Confirm New Password: Re-enter your new password.
Click OK to save your new password. Click Cancel to cancel your change. For
information, click Help.
You can change your password only if you have been granted that privilege by your
system administrator.
Connecting Provisioning
,
page appears. The page displays the IP address
Activating Policy
, , and
page appears.
C
Verifying
169