Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual page 132

VPN
Setting Up a Gateway to Gateway (Site to Site) VPN
Cisco Small Business RV0xx Series Routers Administration Guide
- IP Only: Choose this option if this router has a static WAN IP address.
The WAN IP address appears automatically.
For the Remote Security Gateway Type, an extra field appears. If you
know the IP address of the remote VPN router, choose IP Address, and
then enter the address. If you do not know the IP address of the remote
VPN router, select IP by DNS Resolved, and then enter the real domain
name of the router on the Internet. Cisco RV082 will get the IP address of
remote VPN device by DNS Resolved, and IP address of remote VPN
device will be displayed in the VPN Status section of the VPN >
Summary page.
- IP + Domain Name (FQDN) Authentication: Choose this option if this
router has a static IP address and a registered domain name, such as
MyServer.MyDomain.com. Also enter the Domain Name to use for
authentication. The domain name can be used only for one tunnel
connection.
For the Remote Security Gateway Type, an extra field appears. If you
know the IP address of the remote VPN router, choose IP Address, and
then enter the address. If you do not know the IP address of the remote
VPN router, select IP by DNS Resolved, and then enter the real domain
name of the router on the Internet. Cisco RV082 will get the IP address of
remote VPN device by DNS Resolved, and the IP address of remote VPN
device will be displayed in the VPN Status section of the VPN >
Summary page.
- IP + E-mail Addr.(USER FQDN) Authentication: Choose this option if
this router has a static IP address and you want to use an email address
for authentication. The current WAN IP address appears automatically.
Enter any Email Address to use for authentication.
For the Remote Security Gateway Type, an extra field appears. If you
know the IP address of the remote VPN router, choose IP Address, and
then enter the address. If you do not know the IP address of the remote
VPN router, select IP by DNS Resolved, and then enter the real domain
name of the router on the Internet. Cisco RV082 will get the IP address of
remote VPN device by DNS Resolved, and IP address of remote VPN
device will be displayed in the VPN Status section of the VPN >
Summary page.
- Dynamic IP + Domain Name (FQDN) Authentication: Choose this
option if this router has a dynamic IP address and a registered Dynamic
DNS hostname (available from providers such as DynDNS.com). Enter a
Domain Name to use for authentication. The domain name can be used
only for one tunnel connection.
9
132