Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual page 68

DHCP
Setting Up the DHCP Server or DHCP Relay
STEP 1
STEP 2
Cisco Small Business RV0xx Series Routers Administration Guide
• To modify the settings: Click a device in the list. The information appears in
the text fields. Make the changes, and then click Update. If you do not need
to make changes, you can click Add New to de-select the entry and clear
the text fields.
• To delete an entry from the list: Click the entry that you want to delete, and
then click Delete. To select a block of entries, click the first entry, hold down
the Shift key, and then click the final entry in the block. To select individual
entries, press the Ctrl key while clicking each entry. To de-select an entry,
press the Ctrl key while clicking the entry.
Using the Static IP List to Block Devices
You can use the Static IP list to control access to your network. You can block
access by devices that are not on the list or do not have the correct IP address.
Add devices to the Static IP list as described in
IPv4 Only), page 66.
Enable or disable the following features:
• Block MAC address on the list with wrong IP address: Check this box to
prevent a computer from accessing your network if its IP address has been
changed. For example, if you previously assigned a static IP address of
192. 1 68. 1 . 1 00 and someone configures the device to use 192. 1 68. 1 49, the
device will not be allowed to connect to your network. This feature
discourages users from changing their device IP addresses without your
permission. Uncheck the box to allow access regardless of the current IP
address assignment.
• Block MAC address not on the list: Check this box to block access from
devices that are not included in the Static IP list. This feature prevents
unknown devices from accessing your network. Uncheck the box to allow
access by any connected device that is configured with an IP address in
the correct range.
About Static IP Addresses (for
4
68