Using Content Filters To Control Internet Access - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

Using Content Filters to Control Internet Access

Using Content Filters to Control Internet Access
NOTE
NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Use the Firewall > Content Filter page to prevent your users from accessing
inappropriate websites. You can block access by specifying domains and
keywords.
To open this page: Click Firewall > Content Filter in the navigation tree.
Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
You can block access to specified domains or, to block a wider range of sites,
block access to URLs containing specified keywords. You also can specify the
days and hours when these filters are active. This page includes these sections:
• Forbidden Domains, page 111
• Website Blocking by Keywords, page 111
• Schedule, page 112
The content filter rules will be automatically disabled if the Cisco ProtectLink
service is activated on the router. Instead configure the ProtectLink features to
control Internet access. For more information, see
Web."
Chapter 8, "Cisco ProtectLink
7
110