Wall Mounting - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

Introduction
Mounting Options
WARNING
WARNING
STEP 1
Cisco Small Business RV0xx Series Routers Administration Guide

Wall Mounting

The router has two wall-mount slots on the bottom panel. To mount the router on a
wall, you need mounting hardware (not included). Suggested hardware is
illustrated below (not true to scale).
Suggested Hardware for
RV042 and RV042G
5-5.5 mm 20-22 mm
Insecure mounting might damage the router or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
For safety, ensure that the heat dissipation holes are facing sideways.
Drill two pilot holes into the surface.
• RV042 and RV042G: 58 mm apart
• RV082 and RV016: 94 mm apart
Suggested Hardware for
RV082 and RV016
6.5-7 mm 16.5-18.5
mm
1
13