Chapter 5: System Management; Setting Up Dual Wan And Multi-Wan Connections - Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual

System Management

Setting Up Dual WAN and Multi-WAN Connections

NOTE
Cisco Small Business RV0xx Series Routers Administration Guide
Use the System Management module to manage advanced settings, to configure
diagnostic tools, and to perform tasks such as firmware upgrades, backups, and
reboots. Refer to these topics:
• Setting Up Dual WAN and Multi-WAN Connections, page 73
• Managing the Bandwidth Settings, page 81
• Setting Up SNMP, page 84
• Enabling Device Discovery with Bonjour, page 85
• Using Built-In Diagnostic Tools, page 87
• Restoring the Factory Default Settings, page 89
• Upgrading the Firmware, page 90
• Restarting the Router, page 91
• Backing Up and Restoring the Settings, page 92
Use the System Management > Dual WAN page (or Multi-WAN on RV016) to
configure the settings for your Internet connections, if you are using more than one
WAN interface.
To open this page: Click System Management > Dual WAN (or Multi-WAN on
RV016) in the navigation tree.
Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
5
73