Changing The Administrator Username And Password; Troubleshoot Your Connection - Cisco Small Business RV320 Quick Start Manual

Logging In
To log into the device:
Launch a web browser.
S 1
TEP
In the address bar, enter the default IP address of the device,
S 2
TEP
https://192.168.1.1. A site security certificate message is
displayed. The Cisco RV320/RV325 uses a self-signed security
certificate. This message appears because the device is not
known to your computer.
Click Continue to this website (or the option shown on your
S 3
TEP
particular web browser) to continue. The login displays.
Enter the username and password. The default username is cisco.
S 4
TEP
The default password is cisco. Passwords are case sensitive.
Click Log In. The Device Manager application starts.
S 5
TEP
We recommend that you change the password. You are required to
change the password before enabling features such as remote
management.

Changing the Administrator Username and Password

To change the Administrator username and password on the device:
From the Getting Started page, select Change Administrator
S 1
TEP
Password or select Setup > Password from the navigation bar.
Change the Username.
S 2
TEP
Enter the Old Password.
S 3
TEP
Enter the New Password.
S 4
TEP
Confirm the New Password.
S 5
TEP
Click Save.
S 6
TEP

Troubleshoot Your Connection

If you cannot access your device by using Device Manager, the device
might not be reachable from your computer. You can test network
connections by using ping on a computer running Windows:
Open a command window by using Start > Run and enter cmd.
S 1
TEP
At the Command window prompt, enter ping and the device IP
S 2
TEP
address. For example, ping 192. 1 68. 1 . 1 (the default static IP
address of the device).
8 Cisco RV320/RV325 Gigabit Dual WAN VPN Router Quick Start Guide