Cisco RV016 - Small Business - 10/100 VPN Router Administration Manual page 45

Setup
Setting Up Port Forwarding and Port Triggering
Cisco Small Business RV0xx Series Routers Administration Guide
• To add an entry to the list: Enter the following information, and then click
Add to list.
- Service: Select the service. If a service is not listed, you can add a
service. For details, see
- IP Address: Enter the LAN IP address of the server that you want the
Internet users to access.
- Enable: Check the box to enable this port range forwarding entry.
• To add another new entry: Enter the information, and then click Add to list.
• To modify an entry in the list: Click the entry that you want to modify. The
information appears in the text fields. Make the changes, and then click
Update. If you do not need to make changes, you can click Add New to de-
select the entry and clear the text fields.
• To delete an entry from the list: Click the entry that you want to delete, and
then click Delete. To select a block of entries, click the first entry, hold down
the Shift key, and then click the final entry in the block. To select individual
entries, press the Ctrl key while clicking each entry. To de-select an entry,
press the Ctrl key while clicking the entry.
• To view the port range table: Click View, near the bottom of the page.
Choose Port Range Forwarding or Port Triggering. To update the display,
click Refresh. To return to the Forwarding page, click Close.
Adding a service, page
3
46.
45