AT&T Merlin II Feature Module 2 System Manual page 35

USE THE STORED SHIFT
CONFIGURATIONS
SCREEN
4-6 Building or Editing Shift Configurations
Administering shift configurations begins with the Stored Shift Configurations
screen shown below. Pressing
Administration Menu screen selects this screen.
Bon Voyage Travel
F Select F Save F
1 Config 2 Config 3 Config
This section describes the following activities you can perform from the
Stored Shift Configurations screen:
Edit a Shift Configuration. Create a new shift configuration or change an
existing one.
Save an Edited Configuration. Store the shift configuration that was last
edited.
Rename a Shift Configuration. Name or rename a shift configuration.
Select a Startup Configuration. Select one of your shift configurations to
be invoked automatically during the startup procedure.
Return to Other Screens. If you press
return to the Configuration Screen, which displays the configuration you
last selected. (That configuration name is shown in reverse video on the
Stored Shift Configurations screen.) If you press
Menu" on a shift configuration screen) you return to the Administration
Menu.
use the Stored Shift Configurations screen, do the following:
To
Press the function key for the activity you want to perform.
Perform the activity using the instructions on the following pages.
Press (labeled "Admin Menu" ) to return to the Admin Menu when
[ F8 ]
you are through administering configurations.
(labeled "Config List" ) from the
[ F1 ]
STORED SHIFT CONFIGURATIONS
1 - DAILY
2 - WEEKEND
3 - NIGHT
4 - E V E N I N G
5 - UNUSED
6 - UNUSED
Rename F Choose
4 Startup
[ F7 ]
ADMIN CMSIIR2 10:38a
F 1 0 - H e l p
F Config
7 S c r e e n
(labeled "Config Screen" ), you
, (labeled "Admin
[ F8 ]
06/13
F Admin
8 M e n u