Sntp Server Status; Figure 45: Sntp Server Status; Table 35: Sntp Server Status Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
Priority
Version
• To add an SNTP server, select Create from the Server list, complete the remaining fields as desired, and click Submit.
The SNTP server is added, and is now reflected in the Server list. You must perform a save to retain your changes over
a power cycle.
• To removing an SNTP server, select the IP address of the server to remove from the Server list, and then click Delete.
The entry is removed, and the device is updated.
SNTP S S
ERVER TATUS
The SNTP Server Status page displays status information about the SNTP servers configured on your switch.
To access the SNTP Server Status page, click LAN > Monitoring > SNTP Summary > Server Status in the navigation
menu.
Field
Address
Last Update Time
Last Attempt Time
Document 34CSFP6XXUWS-SWUM100-D7
Table 34: SNTP Server Configuration Fields (Cont.)
Description
Specifies the priority of this server entry in determining the sequence of servers to
which SNTP requests are sent. Values are 1 to 3, and the default is 1. Servers with
lowest numbers have priority
Enter the protocol version number. Values are 1 to 4, and the default is 4.

Figure 45: SNTP Server Status

Table 35: SNTP Server Status Fields

Description
Specifies all the existing Server Addresses. If no Server configuration exists, a
message saying "No SNTP server exists" flashes on the screen.
Specifies the local date and time (UTC) that the response from this server was used
to update the system clock.
Specifies the local date and time (UTC) that this SNTP server was last queried.
D-Link Unified Access System
Configuring SNTP Settings Page 99