Figure 366: Wids Client Configuration; Table 341: Wids Client Configuration - D-Link DWS-4026 User Manual

D-Link Unified Access System
Table 341 describes the fields on the WIDS Client Configuration page.
Field
Not Present in Known Client Database
Test
Configured Authentication Rate Test
Configured Probe Requests Rate Test
Configured De-Authentication
Requests Rate Test
Maximum Authentication Failures Test This test checks whether the client has exceeded the maximum number of
Authentication with Unknown AP Test
Page 528 Configuring Advanced Settings

Figure 366: WIDS Client Configuration

Table 341: WIDS Client Configuration

Description
This test checks whether the client, which is identified by its MAC address, is
listed in the Known Client Database and is allowed access to the AP either
through the Authentication Action of Grant or through the White List global
action.
If the client is in the Known Client Database and has an action of Deny, or if
the action is Global Action and it is globally set to Black List, the client fails this
test.
This test checks whether the client has exceeded the configured rate for
transmitting 802.11 authentication requests.
This test checks whether the client has exceeded the configured rate for
transmitting probe requests.
This test checks whether the client has exceeded the configured rate for
transmitting de-authentication requests.
failed authentications.
This test checks whether a client in the Known Client database is
authenticated with an unknown AP.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09