Software User Manual
12/10/09
M
R
ULTICAST
OUTER
If a multicast router is attached to the switch, its existence can be learned dynamically. You can also statically configure a
switch port as a multicast router interface. Use the Multicast Router Configuration page to manually configure an interface
as a static multicast router interface.
To access the IGMP Snooping Multicast Router Configuration page, click LAN > L2 Features > IGMP Snooping >
Multicast Router Configuration in the navigation tree.
Field
Slot/Port
Multicast Router
If you enable or disable multicast router configuration on an interface, click Submit to apply the new settings to the switch.
M
R
ULTICAST
OUTER
Use the IGMP Snooping Multicast Router Status page to see whether a particular interface is configured as a multicast router
interface.
To access the IGMP Snooping Multicast Router Statistics page, click LAN > Monitoring > IGMP Snooping Status >
Multicast Router Status in the navigation tree.
Document
34CSFP6XXUWS-SWUM100-D7
C
ONFIGURATION
Figure 140: Multicast Router Configuration
Table 123: Multicast Router Configuration Fields
Description
Select the physical or LAG interface to display.
Set the multicast router status:
• Enabled: The port is a multicast router interface.
• Disabled: The port does not have a multicast router configured.
S
TATUS
Figure 141: Multicast Router Status
D-Link Unified Access System
Configuring IGMP Snooping
Page 219