Interface Configuration; Statistics; Figure 99: Isdp Interface Configuration; Table 84: Isdp Interface Configuration - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Version
Holdtime
Capability
Platform
Port ID
Protocol Version
Last Time Changed
I C
NTERFACE ONFIGURATION
From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface. To display the ISDP
Cache Table page, click LAN > Administration > ISDP > Interface Configuration in the navigation tree.
If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to transmit
ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the interface will not
transmit ISDP packets, regardless of the mode configured on the interface.
The following table describes the fields available on the ISDP Interface Configuration page.
Field
Slot/Port
ISDP Mode
S
TATISTICS
From the ISDP Statistics page, you can view information about the ISDP packets sent and received by the switch. To
display the ISDP Statistics page, click LAN > Monitoring > ISDP > Statistics in the navigation tree.
Page 172 Configuring and Viewing ISDP Information
Table 83: ISDP Cache Table
Description
Displays the Version string for the neighbor.
Displays the ISDP holdtime for the neighbor.
Displays the ISDP Functional Capabilities for the neighbor.
Displays the ISDP Hardware Platform for the neighbor.
Displays the ISDP port ID string for the neighbor.
Displays the ISDP Protocol Version for the neighbor.
Displays when entry was last modified.

Figure 99: ISDP Interface Configuration

Table 84: ISDP Interface Configuration

Description
Select the interface with the ISDP mode status to configure or view.
Use this field to enable or disable the Industry Standard Discovery Protocol on the
selected interface.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09