Software User Manual
12/10/09
M
R
ULTICAST
OUTER
The switch can dynamically learn of an attached multicast router, or you can configure a switch port as a multicast router
interface. Use the MLD Snooping Multicast Router Configuration page to configure an interface as a static multicast router
interface.
To access the MLD Snooping Multicast Router Configuration page, click LAN > L2 Features> MLD Snooping > Multicast
Router Configuration in the navigation tree.
Field
Slot/Port
Multicast Router
•
If you enable or disable multicast router configuration on an interface, click Submit to apply the new settings to the
switch.
M
R
ULTICAST
OUTER
Use the MLD Snooping Multicast Router Status page to view multicast router functionality on selected ports. To access this
page, click LAN > Monitoring > MLD Snooping > Multicast Router Status in the navigation tree.
Document
34CSFP6XXUWS-SWUM100-D7
C
ONFIGURATION
Figure 152: MLD Snooping Multicast Router Configuration
Table 135: MLD Snooping Multicast Router Configuration Fields
Description
Select the physical or LAG interface to display.
Set the multicast router status:
• Enabled: The port is a multicast router interface.
• Disabled: The port does not have multicast router configured.
S
TATUS
Figure 153: MLD Snooping Multicast Router Status
D-Link Unified Access System
Configuring MLD Snooping
Page 231