D-Link Unified Access System
To access the Port Summary Statistics page, click LAN > Monitoring > System Statistics > Port Summary in the
navigation tree.
Field
Slot/Port
ifIndex
Total Packets Received
Without Errors
Packets Received With Error
Broadcast Packets Received
Packets Transmitted Without
Errors
Transmit Packet Errors
Collision Frames
Time Since Counters Last
Cleared
•
Click Clear Counters to clear all the counters. This resets all statistics for this port to the default values.
•
Click Clear All Counters to clear all the counters for all ports on the switch. The button resets all statistics for all ports
to default values.
•
Click Refresh to refresh the data on the screen and display the most current statistics.
Page 138
Viewing System Statistics
Figure 71: Port Summary
Table 61: Port Summary Statistics Fields
Description
Use the drop-down menu to select the interface for which data is to be displayed or
configured.
This field indicates the ifIndex of the interface table entry associated with this port on
an adapter.
The total number of packets received that were without errors.
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
The total number of good packets received that were directed to the broadcast
address. Note that this does not include multicast packets.
The number of frames that have been transmitted by this port to its segment.
The number of outbound packets that could not be transmitted because of errors.
The best estimate of the total number of collisions on this Ethernet segment.
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port
were last cleared.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09