Table of Contents
Advertisement
Software User Manual
12/10/09
A
T
D
BOUT
HIS
OCUMENT
This guide describes how to configure the D-Link 4000 Series switch software features by using the Web-based graphical
user interface (GUI). The D-Link 4000 Series switch architecture accommodates a variety of software modules so that a
platform running D-Link software can be a Layer 2 switch in a basic network or a Layer 3 router in a large, complex network.
A
UDIENCE
The information in this guide is intended for any of the following individuals:
•
System administrators who are responsible for configuring and operating a network using D-Link 4000 Series switch
•
Level 1 and/or Level 2 Support providers
To obtain the greatest benefit from this guide, you should have an understanding of the base software and should have read
the specification for your networking device platform. You should also have basic knowledge of Ethernet and networking
concepts.
O
RGANIZATION
This guide contains the following sections:
•
Section 1: "Getting Started" on page 45
accessing the user interfaces.
•
Section 2: "System Administration" on page 55
DHCP, and port information.
•
Section 3: "Configuring L2 Features" on page 175
•
Section 4: "Configuring L3 Features" on page 279
•
Section 5: "Configuring Quality of Service" on page 325
Service, and Auto VoIP features.
•
Section 6: "Configuring Access Control Lists" on page 344
•
Section 7: "Managing Device Security" on page 359
such as captive portal configuration, port access control, TACACS+, and RADIUS server settings.
•
Section 8: "Configuring the Wireless Features" on page 405
multiple access points on the network.
•
Appendix A "Configuration Examples"
interface, command-line interface, and Simple Network Management Protocol (SNMP).
Document
34CSFP6XXUWS-SWUM100-D7
contains information about performing the initial system configuration and
describes how to configure administrative features such as SNMP,
describes how to manage and monitor the layer 2 switching features.
describes how to configure the layer 3 routing features.
describes how to configure the Differentiated Services, Class of
describes how to manage the D-Link software ACLs.
contains information about configuring switch security information
describes how to configure the switch so it can manage
describe how to configure selected features on the switch by using the Web
D-Link Unified Access System
About This Document
Page 43
- Quick Links:
- Section 1: Getting Started
Hide quick links:
Advertisement
Table of Contents
