Software User Manual
12/10/09
CP G
S
LOBAL
TATUS
The CP Global Status page contains a variety of information about the CP feature. From the CP Global Status page, you
can access information about the CP activity and interfaces.
To view captive portal status information, click LAN > Security > Captive Portal > CP Status.
Table 232
describes the fields displayed on the CP Global Status page.
Field
CP Global Operational Status
CP Global Disable Reason
Supported Local Users
Configured Local Users
System Supported Users
CP IP Address
Supported Captive Portals
Configured Captive Portals
Active Captive Portals
Authenticated Users
Viewing CP Activation and Activity Status
The CP Activation and Activity Status page provides information about each CP configured on the switch.
Document
34CSFP6XXUWS-SWUM100-D7
Figure 262: Global Captive Portal Status
Table 232: Global Captive Portal Status
Description
Shows whether the CP feature is enabled.
Indicates the reason for the CP to be disabled, which can be one of the following:
• None
• Administratively Disabled
• No IPv4 Address
• Routing Enabled, but no IPv4 routing interface
Shows the number of entries that the Local User database supports.
Shows the number of users configured in the system.
Shows the number of authenticated users that the system can support.
Shows the captive portal IP address
Shows the number of supported captive portals in the system.
Shows the number of captive portals configured on the switch.
Shows the number of captive portal instances that are operationally enabled.
Shows the number of users currently authenticated to all captive portal instances on
this switch.
D-Link Unified Access System
Captive Portal Configuration
Page 375