Port Security Interface Configuration; Figure 175: Port Security Interface Configuration; Table 156: Port Security Interface Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
P S I
ORT ECURITY NTERFACE
Use this page to configure the port security feature on a selected interface.
To access the Port Security Interface Configuration page, click LAN > Security > Port Security Interface Configuration
in the navigation tree.
Field
Slot/Port
Port Security
Maximum Number of
Dynamically Learned MAC
Addresses Allowed
Add a Static MAC Address
VLAN ID
Maximum Number of Statically
Locked MAC Addresses
Allowed
Convert dynamically learned
address to static locked
Document 34CSFP6XXUWS-SWUM100-D7
C
ONFIGURATION

Figure 175: Port Security Interface Configuration

Table 156: Port Security Interface Configuration Fields

Description
Select the physical interface or the LAG on which to configure port security
information.
Determines whether port security is enabled. The default mode is Disable.
• Enable: Locks the port so that only packets with allowable source MAC addresses
can be forwarded. All other packets are discarded.
• Disable: The port is not locked, so no port security restrictions are applied.
Sets the maximum number of dynamically learned MAC addresses on the selected
interface. Once the limit is reached, no more addresses are learned on the port. Any
packets with source MAC addresses that were not already learned are discarded. You
can effectively disable dynamic locking by setting the number of allowable dynamic
entries to zero.
Adds a MAC address to the list of statically locked MAC addresses for the selected
interface. Only packets with an allowable source MAC address can be forwarded.
Adds a corresponding VLAN ID for the MAC Address being added to the list of
statically locked MAC addresses for the selected interface.
Sets the maximum number of statically locked MAC addresses on the selected
interface.
When you click Move, all the dynamically learned entries on this interface are added
to the static MAC address list for this interface. After moving them, you can view them
in the Port Security Static page.
D-Link Unified Access System
Configuring Port Security Page 259