Viewing Ip Discovery Status; Table 277: Switch Status/Statistics - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Total Access Points
Managed Access
Points
Discovered Access
Points
Connection Failed
Access Points
Maximum Managed
Access Points
WLAN Utilization
Total Clients
Authenticated Clients
IP Address
Cluster Priority
Distributed Tunnel
Clients
WLAN Bytes
Transmitted
WLAN Bytes Received
WLAN Bytes Transmit
Dropped
WLAN Bytes Received
Dropped
WLAN Packets
Transmitted
WLAN Packets
Received
WLAN Packets
Transmit Dropped
WLAN Packets Receive
Dropped

Viewing IP Discovery Status

From the WLAN > Monitoring > Global > IP Discovery tab, you can view information about communication with the devices
in the IP discovery list on the WLAN > Administration > Basic Setup > Discovery page.
Page 456 Monitoring Status and Statistics

Table 277: Switch Status/Statistics

Description
Total number of Managed APs in the database. This value is always equal to the sum of
Managed Access Points, Connection Failed Access Points, and Discovered Access Points.
Number of APs in the managed AP database that are authenticated, configured, and have an
active connection with the wireless switch.
APs that have a connection with the switch, but haven't been completely configured. This
value includes all managed APs with a Discovered or Authenticated status.
Number of APs that were previously authenticated and managed, but currently don't have
connection with the wireless switch.
Maximum number of access points that can be managed by the switch.
Total network utilization across all APs managed by this switch. This is based on global
statistics.
Total number of clients in the database. This total includes clients with an Associated,
Authenticated, or Disassociated status.
Total number of clients in the associated client database with an Authenticated status.
IP address of the switch.
Cluster priority value of the switch.
The switch with highest priority in a cluster becomes the Cluster Controller. If the priority is the
same then the switch with lowest IP address becomes the Cluster Controller. A priority of 0
means that the switch cannot become the Cluster Controller.
Total number of clients that are associated with an AP that are using distributed tunneling.
Total bytes transmitted across all APs managed by the switch.
Total bytes received across all APs managed by the switch.
Total bytes transmitted across all APs managed by the switch that were dropped.
Total bytes received across all APs managed by the switch that were dropped.
Total packets transmitted across all APs managed by the switch.
Total packets received across all APs managed by the switch.
Total packets transmitted across all APs managed by the switch that were dropped.
Total packets received across all APs managed by the switch that were dropped.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09