Troubleshooting Ip Connectivity; Hiding Or Exiting Altiview - Altigen AltiView Manual

For altiware open edition (oe) / altiserv contact center (acc) release 5.0 and alticontact manager (acm) release 5.0
Hide thumbs Also See for AltiView:
Table of Contents

Advertisement

• NetMeeting 3.01, which is automatically installed with Windows
2000. You can check your system to see if NetMeeting is installed by
looking under Programs>Accessories>Communication from the
Windows Start button. If not, it is available for download from the
Microsoft website at http://www.microsoft.com/windows/netmeeting/
download/default.asp.
• Additional system requirements as listed on the Microsoft website at
http://www.microsoft.com/windows/NetMeeting/
SystemRequirements/default.ASP.
Note: AltiWare/AltiContact Manager uses conferencing features that
require the same data channels as NetMeeting. If NetMeeting is
running, you will see a prompt reminding you to close the program.
In addition, processor-intensive applications will affect voice
quality.
To make and receive calls using NetMeeting:
Connect your headset to your PC. Use the AltiView Dial and call
accepting functions as usual to make and receive calls.

Troubleshooting IP Connectivity

If problems occur, they may be due to a failure to connect to your ISP or
due to firewalls at your office preventing direct access to the AltiWare/
AltiContact Manager server.
As a test, you can choose Run from the Windows Start menu, then enter
Ping <IP address> [ENTER]
where <IP address> is the AltiWare/AltiContact Manager system you
want to connect to. An example of the IP address format is
123.234.231.143
If you do not get a response, contact your LAN administrator for support.
Next, check to verify if ports are open.

Hiding or Exiting AltiView

8 AltiView Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altiview 5.0

Table of Contents