Settings Management - Panasonic WJ-ND400K Setup Instructions

Maintenance

Settings management

Use the following procedure to save setup menu settings to the recorder and to load previously saved settings. This procedure also can be used
to return setup menu settings to their initial defaults.
1
Click the [Maintenance] button on the setup menu.
2
On the sub-menu that appears, click [Settings
management].
This will display the "Settings management" window.
Settings management
Item
User setup save
User setup load
Reset to the default
Important:
• Even if you perform [User setup load]/[Reset to the default], the following settings cannot be loaded or initialized.
⋅ [NW link down detection]
⋅ [Bandwidth control]
⋅ [HTTP port number]
⋅ [FTP port number]
⋅ [Network settings]
⋅ [DNS Settings]
• Performing [User setup load] sets host authentication to [Off].
82
Saves user setup data to the recorder.
Loads user setup data saved on the recorder.
Initializes settings.
3
Click the button of the respective item to suit your
particular requirements.
• Each selected item is executed.
Refer to "Settings management" table for details about each
item.
Description