Server
Proxy
Use the following procedure to configure settings to use the proxy server.
1
Click the [Server] button on the setup menu.
2
On the sub-menu that appears, click [Proxy].
This will display the "Proxy setting" window.
Proxy settings
Item
Proxy setup use
Server address
Port number
Exceptions
♦Initial default
60
Settings
Off♦ / On
Address input
(Blank♦)
Port number input
(80♦)
Address input
(Blank♦)
3
Configure the settings for each item.
Refer to "Proxy settings" table for details about the settings.
4
Click the [Set] button.
Description
Specifies whether a proxy server is used.
•
When [On] is selected, configure the [Server address], [Port
number], and [Exceptions] settings.
Enter the name or IP address of the proxy server. When
entering a server name, you must use the DNS.
•
Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).
Enter the proxy server port number.
Specifies cameras that do not use the proxy server. Enter the IP
addresses of the exception cameras.
•
Enter up to 128 single-byte alphanumeric characters,
including asterisk (*) and period (.).
•
When specifying multiple addresses, separate them by
semicolons (;). You can use the "*" special character to
represent any number.