About Operating Windows; Display And Close The Operating Window - Panasonic WJ-ND400K Setup Instructions

About operating windows

Display and close the operating window

Operate the recorder from a web browser on a PC.
1
Start the PC.
2
Launch the web browser.
3
Enter the URL or IP address set for the recorder into the
address box and press the [Enter] key.
The authentication window is displayed.
• If [User authentication] is [Off], the authentication window
does not open (page 68).
Important:
• Refer to your system administrator for the IP address settings.
• If the [Host authentication] is [On] (page 72), only PCs that
have an IP address that is registered with the recorder can
connect to the recorder.
For more information, contact your system administrator.
• Do not enter "0" on the front of the IP address when inputting
it.
Example:
OK: 192.168.0.50
NG: 192.168.0.050
• Refer to page 96 if a message appears in the information bar.
4
Enter a "User name" and "Password" that is registered
with the recorder, and click the [Login] button.
The top page is displayed.
Important:
• Refer to your system administrator for the user name and
password set for you.
Refer to "Users (page 70)" for information about user
registration.
• The default user name and password settings are shown
below.
User name: ADMIN
Password: 12345
• To ensure security, change the ADMIN password before
starting operations. Also, change the password periodically.
Refer to page 70 for information about changing passwords.
• When the unit is being operated without changing the default
administrator name and password, the pop-up window saying
that it is recommended to change the password will be
displayed.
15