Status Display Area - Panasonic WJ-ND400K Setup Instructions

Status display area

(1) Displays the status of live and playback
images.
: Live images are being displayed.
: Recorded images are being played back.
: Images are being played back reversely.
: Images are being played back at fast
forward.
: Images are being played back reversely at
fast forward.
: Playback is paused.
: Recorded images and audio are being
downloaded.
: Recorded images and audio have been
downloaded.
[Step 1] to [Step 7]
: The playback speed is displayed.
: The sequence is being activated.
: Normal recording area or event recording
area of the HDD on the recorder is
selected.
: HDD copy area is selected.
: SD memory data is currently being
obtained.
: RAID is being recovered.
: Rec event list is filtered. For details on
filtering of recording event searches, refer
to the Operating Instructions (PDF File).
(1) (2)
: 1x
: Approx. 4x
: Approx. 8x
: Approx. 16x
: Approx. 32x
: Approx. 48x
: Approx. 96x
About operating windows
(3) (4)
(2) [REC] indicator
Displays the recording status.
: Recording is being performed.
: Recording is not being performed.
(3) Display the following statuses.
: Camera cannot be operated because a
user with a higher priority is using the
camera.
: Copying is being performed.
: Image data is being deleted.
(4) Information about the events and errors is
displayed.
"Alarm suspend [ALARM SUSPEND]" button
: Clicking this button to temporarily disable
alarm detection. (refer to the Operating
Instructions (PDF file))
: This indication will be displayed while an
alarm is being suspended.
"Alarm [ALM]" button
: Displays when an event occurs. Clicking
this button clears the alarm action. (refer
to the Operating Instructions (PDF file))
"Error [ERR]" button
: An error has occurred. Clicking this button
clears the error occurrence. Refer to the
Operating Instructions (PDF file) for further
information about errors.
Note:
• Emergency recording does not stop even if you click the "Alarm
[ALM]" button while recording. However, recording does stop if
the recording time is set to [Continue] for emergency recording.
21