Panasonic WJ-ND400K Setup Instructions page 10

Getting started
Setting item
User mng.
Basic
Administrator
User
Host
User level
Maintenance
Product information
Disk information
Network information Display network information such as the camera address set on the recorder
Disk
Settings
management
Config.
Disk information
Format
10
Description
Set whether user and host authentication should be performed.
Edit registered administrator information such as the administrator name,
password, and start monitor.
Edit or delete registered user information and register uses who can operate
the recorder.
You can also set the operation level, user name, and password.
Edit or delete registered host information and register PCs (hosts) that can
access the camera over a network.
You can also set the operation level and the IP address of the PC.
Set the functions available at each user level.
Display the version of the software and hardware, the MAC address, serial
number, and the internal temperature of the recorder.
Displays information about recording, the disk operational mode, disk space
capacity, and the recording area.
and the line speed of the recorder.
Set operations for when the HDD is full and perform deletion of data stored
on the HDD.
Save, load and initialize the content of the setup menu on the recorder.
Displays information about recording, the disk operational mode, disk space
capacity, and the recording area.
Format the HDD and assign Event recording areas and Copy areas to the
HDD.
Page
page 68
page 69
page 70
page 72
page 74
page 76
page 77
page 79
page 80
page 82
page 84
page 86