Panasonic WJ-ND400K Setup Instructions page 51

4
Check or change the items you want.
Refer to "NW camera settings 2" table for details about the
settings.
5
Click the [Set] button.
NW camera settings 2
Item
Manufacturer
Model/Compression
Address
Port number
Group
Camera title
User name
Password
Time zone
♦Initial default
Note:
• When the set camera is disconnected, [CONNECT ERROR] is displayed. In this case, [Model/Compression] is set as [--] for the removed
camera on the network camera registration window. Delete the address in [Address].
• If the camera cannot be connected with, the reasons are displayed in the thumbnail. The primarily displayed contents are as follows.
Item
CONNECT ERROR
ATTEST ERROR
DNS ERROR
CAMERA ERROR
PROXY(CONNECT) ERROR
PROXY(DNS) ERROR
PROXY(CAMERA) ERROR
Settings
Panasonic♦ / Axis
--♦
Model/JPEG
Model/M-JPEG
Model/MPEG4
Address input (Blank♦)
Port number input (80♦)
G1♦ to G8
Title input
(Camera 1:1♦ to
Camera 64:64♦)
Name input
(Blank♦)
Enter password
(Blank♦)
GMT-12:00 to GMT+13:00
NTSC model : (GMT-5:00♦)
PAL model : (GMT+0:00♦)
Could not communicate with the camera.
Camera user authentication failed.
The DNS server cannot resolve the camera address.
The response from the camera is incorrect.
Cannot connect with the proxy server.
Cannot resolve the proxy server address.
The response from the proxy server is incorrect.
Description
Specifies the camera manufacturer.
Specifies the camera model and image compression format.
Refer to the "readme.txt" file on the CD-ROM for details about
camera's model number.
Changing the compression format automatically changes the
live video and recording rate settings. If you change the setting,
reconfigure the rate setting (page 42).
• Changing from MPEG-4 to JPEG or M-JPEG will change the
rate setting to [1ips].
• Changing from JPEG or M-JPEG to MPEG-4 will change the
rate setting to [I-Frame].
• Changing the compression mode and non-compression
mode items at the same time will change the rate setting to
[Off].
For entering the address of the camera
For setting the HTTP port used by the camera in the range of 1
to 65535.
Specifies the group to which the camera belongs.
Specifies the camera title, which is displayed on the [Cam.
select] box, etc.
• The camera title can be made up of up to 16 single-byte
numerals and symbols, or 16 two-byte characters. The
following characters are not allowed as symbols.
"!$%'<=>@[\]^_`{|}~"
Specifies the user name for accessing a camera and logging in.
• The password can be up to 32 single-byte characters long.
Specifies the password for accessing a camera and logging in.
• The password can be up to 32 single-byte characters long.
Specifies the time zone of the camera.
Description
Camera
51