Deleting Image Data From A Disk - Panasonic WJ-ND400K Setup Instructions

Deleting image data from a disk

Use the following procedure to delete image data from the HDD of the recorder.
There are two methods available for deletion: auto delete and manual delete.
1
Click the [Maintenance] button on the setup menu.
2
On the sub-menu that appears, click [Disk].
This will display the "Disk setting" window.
Data delete
Item
HDD auto delete
Manual delete for normal
recording area
Manual delete for event
recording area
Manual delete for copy area
♦Initial default
Note:
• HDD auto delete does not delete image or video data in the Copy or Pre-event recording areas.
Settings
Off♦ / 1day / 2days / 3days /
4days / 5days / 6days / 7days /
8days / 9days / 10days / 14days /
30days / 1month / 45days /
60days / 90days / 120days /
150days / 180days
08 to 34 (Year) / Jan to Dec
(Month) / 1 to 31 (Day)
08 to 34 (Year) / Jan to Dec
(Month) / 1 to 31 (Day)
08 to 34 (Year) / Jan to Dec
(Month) / 1 to 31 (Day)
3
Configure the settings for each item.
Refer to "Data delete" table for details about the settings.
4
Click the [Set] button.
Description
Specifies automatic image data deletion after the specified
period passes.
• The execution time of the auto delete operation is 00:05:00.
Deletes image data in the normal recording area until the day
before the specified date. After specifying the date, click the
[Delete] button.
Deletes image data in the event recording area until the day
before the specified date. After specifying the date, click the
[Delete] button.
Deletes image data in the copy area until the day before the
specified date. After specifying the date, click the [Delete]
button.
Maintenance
81