1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. CD Player
  5. WJHD500 - DIGITAL DISC RECORDE
  6. Operating instructions manual

Panasonic WJ-HD500 Operating Instructions Manual

Digital disk recorder
Hide thumbs Also See for WJ-HD500:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Operating Instructions Manual
REM OTO
LOC K
ALAR M
1
2
3
4
ALAR M
TIME R
SPO T
SET
RES ET
MULTIS CREEN
5
6
7
8
ALAR M
MULTIS CREEN
+
SUS PEN D
SELEC T
9
10
11
OPR ATE
HDD
12
-
13
FULL
14
15
16
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Digital Disk Recorder

Operating Instructions

Model No.
REC STO P
GR OU P
SEL ECT
PLA Y PPA USE
RE C RE VIE
W
IND EX
REV
EL- ZO OM
AL AR M SE
FW D
AR CH
DIS PL AY
WJ-HD500
FS
16
16
D ig it a l D is
k
5 0 0
5 0 0
W J -H D

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-HD500

Summary of Contents for Panasonic WJ-HD500

  • Page 1: Operating Instructions

    Digital Disk Recorder Operating Instructions WJ-HD500 Model No. REM OTO LOC K ALAR M REC STO P ALAR M GR OU P TIME R SPO T RES ET SEL ECT MULTIS CREEN PLA Y PPA USE RE C RE VIE...
  • Page 2 Model No. WJ-HD500 nance (servicing) instructions in the litera- Serial No. ture accompanying the appliance. SA 1966 WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

  • Page 3: Table Of Contents

    CONTENTS PREFACE ................. 4 Sequence Setup (Spot Monitor) ......52 FEATURES ............... 4 Power on Status Setup ..........53 PRECAUTIONS ..............5 Power on Setting (Multiscreen Monitor) ....53 MAJOR OPERATING CONTROLS AND Power on Setting (Spot Monitor) ......53 THEIR FUNCTIONS ............6 Secret View Setting ............54 Front View ...............

  • Page 4: Preface

    PREFACE The WJ-HD500 Digital Disk Recorder is a combination of a A multi-recording function records simultaneously several Hard Disk Recorder with a Video Multiplexer; it is able to images from various applications; this enables you to record the signals of up to sixteen sequentially controlled obtain reliable records by selecting the application which is video inputs on the built-in hard disk.

  • Page 5: Precautions

    PRECAUTIONS • Refer all work related to the installation of this • Do not operate the appliance beyond its specified product to qualified service personnel or system temperature, humidity or power source ratings. installers. Use the appliance at temperatures within +5°C - +45°C (41°F - 113°F) and a humidity below 85 %.

  • Page 6: Major Operating Controls And Their Functions

    Recorder WJ-HD q Operate Indicator (OPERATE) u Sequence Button (SEQUENCE) Is on when the power of the WJ-HD500 Digital Disk Runs the assigned sequence on the selected monitor Recorder is turned on. screen. In this mode, a series of camera images is displayed in...
  • Page 7 !1 Numeric Buttons (1 - 16) @1 JogDial Rotate in paused playback to move forward or back- These buttons are used for numeric input into the sys- ward to the next recorded image. tem such as the video selection, password, etc. It is also used to select the recording number when the The indicator in the button lights up to indicate as recorded list is displayed on the monitor.

  • Page 8: Rear View

    Rear View $3 $4 $6 $7 $9 %1 %2 %4 %5 EXT STORAGE COPY SIGNAL GND REMOTE SPOT DATA (WV-CU50) SERIAL CONTROL ALARM MODE MULUTI SCREEN AUDIO POWER VIDEO $1 Multiscreen Output Connector (MULTI SCREEN $6 Control Port (CONTROL) OUT) The port has the functions listed below.
  • Page 9 %0 Reset Button Pressing this button will restart the Disk recorder and return to the powered up state when the Disk Recorder rejects control. %1 Data Port (DATA) Exchanges control data with the external device with PS Data (Panasonic Security Data) mode.

  • Page 10: Wv-Cu50 Remote Controller

    WV-CU50 Remote Controller Remote Controller WV-CU50 LOCK &1 LINK SPOT MULTISCREEN COPY &2 MULTISCREEN REMOTE SELECT PREVIEW &3 &4 SEQUENCE EL-ZOOM &5 &6 GROUP SELECT STOP PLAY/ PAUSE &7 INDEX &8 ALARM ALARM RESET SEARCH &9 STOP &1 Lock Button & LED (LOCK) &4 Recording Preview Button &...
  • Page 11 Pressing this button will stop the recording. *5 Direction Button (CDA B) (2 Remote Terminal (REMOTE) Use these buttons to select the desired area to be Connect to the WJ-HD500 with the supplied modular zoomed in on the Multiscreen Monitor. cable. C: Downward...

  • Page 12: Installation

    The Motion Detector Board WJ-HDB501 is installed exclu- sively in the WJ-HD500 Disk Recorder. 1. Unplug the power cord from the WJ-HD500 Digital Disk Recorder, or disconnect the plug from the AC outlet. 2. Remove the top cover of the Disk Recorder by remov- ing the 11 screws, as shown below.

  • Page 13: Installing The Optional Network Board

    The Network Board WJ-HDB502 is installed exclusively into below. the WJ-HD500 Disk Recorder. 1. Unplug the power cord from the WJ-HD500 Digital Disk Recorder, or disconnect the plug from the AC outlet. Main Board Flat Cable 2.

  • Page 14: Installing The Optional Hard Disk

    Installing the Optional Hard Disk Mounting into the Rack The Disk Recorder can be mounted into the rack as At the time of shipment from the factory, the WJ-HD500 described below. Disk Recorder is equipped with one hard disk drive; an optional drive can be installed to increase the hard disk 1.

  • Page 15: Connections

    SELECT EL-ZOOM ALARM SEARCH SUSPEND SET UP OPERATE DISPLAY SEQUENCE /ESC COPY Digital Disk FULL DAYLIGHT SAVINGS Recorder WJ-HD Digital Disk Recorder WJ-HD500 POWER Multiscreen Monitor Remote Controller WV-CU50 <System Expansion> WJ-MP204 WJ-MP204 POWER ALARM POWER ALARM ALARM SUSPEND ALARM...

  • Page 16: Connection With The Camera Site

    WV-CU50 Connection with the Monitors Connect the monitors to the SPOT OUT connector and MULTI SCREEN OUT connector on the rear of the Disk Recorder with the coaxial cable. Disk Recorder WJ-HD500 SPOT MULUTI SCREEN POWER POWER Spot Monitor Multiscreen Monitor...

  • Page 17: Alarm Port Connection

    • Connect the sensor switches to the ALARM port on the rear of the Disk Recorder, as shown in the example below. Sequence Timing Output Sequence Timing Input Ground Ground ALARM CONTROL WJ-HD500 (2nd) WJ-HD500 (1st) ALARM Designation Designation Alarm Input 1 Ground Alarm Input 2 Alarm Input 5...

  • Page 18: Control Port Connection

    Disk Recorder Error extending its disk capacity. Group Recording Output Output Connect each error output from the Extension Units with the CONTROL Port on the rear of the WJ-HD500 Disk Manual Recording Output Ground Recorder as shown below. Emergency Recording...

  • Page 19: Connection With The Extension Unit

    Data termination and SCSI number settings are required, as shown below. 1 2 3 4 1. Set the MODE switch #2 on the rear of the WJ-HD500 to ON when connecting with an extension unit. 2. Set the SCSI ID number for each unit by pressing the MODE [–] or [+] button on the rear of the Extension Unit.

  • Page 20: Preparations

    PREPARATIONS...

  • Page 21: Power Up Procedure

    POWER UP PROCEDURE Before operating the Disk Recorder, confirm that the cam- Notes: eras and peripherals are connected correctly and securely If during a system check the display shown below and all system components are turned on. appears on the monitor screen, it will be followed by the DISK MENU after five seconds.

  • Page 22: Formatting The Hard Disk

    FORMATTING THE HARD DISK The Hard Disk requires formatting before it can be used for 3. Move the cursor to FORMAT in the menu by pressing the A or B button, then press the SET button. storing images, as shown below. The FORMAT MENU shown below appears on the mon- •...
  • Page 23 6. Select either "1DISK" or "ALL" by pressing the A or B button, then press the SET button. 1DISK: Enables formatting only a specified Hard Disk. ALL: Enables formatting all Hard Disks. If the "1DISK" is selected in the menu, move the cursor to the Hard Disk number to be formatted by pressing the A, B, D or C button, then press the SET button.

  • Page 24: Formatting The Dvd-Ram Disk

    1. Insert the DVD-RAM disk into the DVD Drive Unit. 2. Press and hold the SET UP/ESC button for two sec- onds or more to display the WJ-HD500 SETUP menu on the screen of the Multiscreen Monitor. 5. When the formatting is completed, "COMPLETE"...

  • Page 25: Mirroring Function

    Group 2 Timer Group 2 Recorder Recorder Group 3 Group 3 Group 4 Group 4 Emergency Recorder Emergency Recorder DISK MENU WJ-HD500 Disk 1 (Master) WJ-HD500 Disk 2 (Slave) MAIN 1:30GB 2:30GB EXT5 1:30GB 2:30GB 3:30GB 4:30GB EXT4 1: *...
  • Page 26 5. Select the ALL password (5-digit) by pressing the To deactivate the mirror function: Numeric buttons (1 - 10). • Select “MIRROR RELEASE” in the menu by pressing Refer to the password setup in the SYSTEM SETUP the A, B, D or C button, then press the SET button menu for further details.

  • Page 27: Disk Remove

    DISK REMOVE 3. Select “YES” in the menu by pressing the A or B but- The Disk Recorder will display the DISK MENU on the Multiscreen Monitor during the power-up procedure, if it ton, then press the SET button to execute the disk detects that there are changes to the previous system, as remove.

  • Page 28: Monitors And Displays

    MONITORS AND DISPLAYS Spot and Multiscreen Monitor Status Display The WJ-HD500 Disk Recorder can be connected to two The status display shows the system status of the Disk Monitors. Recorder. The monitor displays the video signal according to the con- It is displayed on the screen of the Multiscreen Monitor dur- nection made, as shown below.
  • Page 29 r Warning Display Displays the status in case of Disk Recorder trouble. THERMAL : Indicates that the Disk Recorder’s tem- perature is rising. %: Is displayed when the remaining space of the Hard Disk reaches a specified value. indicates the remaining capacity.) OVERWRITE: Indicates that data are being overwritten during a recording.

  • Page 30: Hard Disk And Recording

    HARD DISK and RECORDING The WJ-HD500 Hard Disk Recorder records the images on the Hard Disk as shown below, dividing space into six disk sectors. There are three recording modes, Time Lapse, Multi Shot and One Shot, to obtain reliable records by selecting the mode best suited for your purpose.

  • Page 31: Time Lapse Recording

    Time Lapse Recording The Time Lapse Recording records freeze images at regular intervals until the end of the recording operation. • Manual and External (Power-on) Timer Recording is recorded in this mode on the Manual Recorder. Refer to the Manual Recording Setup for further detail setting.

  • Page 32: One Shot Recording

    • Dynamic Recording is set to ALM-ONLY When an alarm is received, it records the assigned camera input in a specified number of pre-recordings, and then records the alarm images in a specified number of post-recordings. Alarm 2 in Alarm 4 in Thumbnail Thumbnail Pre-recording...

  • Page 33: Setup Procedures

    SETUP PROCEDURES...

  • Page 34: Setup Menu

    2. The Disk Recorder has been powered up successfully. 3. Press the SET UP/ESC button for two seconds or more, and the WJ-HD500 SETUP menu as shown below appears automatically on the screen of the Multiscreen Monitor.

  • Page 35: Programming Menu Setup

    Programming Menu Setup As shown below, the WJ-HD500 SETUP menu has eight main submenus. Seven of these are further divided into additional submenus. The (↓) mark indicates that the item has a submenu for more detailed setups. SETUP Timer Page 38...

  • Page 36: Timer Setting

    TIMER SETTING The timer recording mode is triggered by the internal or an external timer. This item lets you enable or disable the timer for recording. WJ-HD500 SETUP 1.00 TIMER REC SETUP COMMON SETUP * MANUAL WITH AUDIO * TIMER...

  • Page 37: Recording Setup

    Video Pixels (Resolution) 1. Move the cursor to COMMON SETUP in the WJ-HD500 This item lets you select the pixel number (number of hori- SETUP menu by pressing the D or C button, then zontal x vertical image elements) or resolution of the video press the SET button.

  • Page 38: Group Setup

    Group Setup Group Title Setup This item lets you edit the group title to be displayed on the As described before, the Disk Recorder activates the monitor screen. recording function of the assigned cameras in four groups Each title is composed of 8 alphanumeric characters. when the TIMER is set to INT (internal).

  • Page 39: Recording Of Title Display

    Recording of the Title Display Playback Mode Setup This item lets you enable or disable recording of the cam- This item lets you select the playback mode according to era and group titles with the image on the Hard Disk. the recorded number when the PLAYBACK button is pressed.

  • Page 40: Manual Recording Setup

    (parameter A* indicates recording with audio) 1. Move the cursor to MANUAL in the WJ-HD500 SETUP menu by pressing the D or C button. When the parameter SF / FQ / NQ / EX is selected for recording time, the recording rate and quality are auto- 2.

  • Page 41: Alarm Recording (Manual Recording)

    Alarm Recording (Manual Recording) These items let you set the recording mode in Time Lapse Recording when an alarm is activated during manual recording. 1. Move the cursor to the ALARM REC MODE parameter by pressing the D or C button, then select a recording time mode by pressing the + or - button.

  • Page 42: Timer Recording Setup

    RATE -:-- -:-- O/S RATE 1. Move the cursor to TIMER in the WJ-HD500 SETUP SET TOTAL REC RATE ON EACH TABLE G1+G2+G3+G4= UNDER 30FPS menu by pressing the D or C button. 2. Select either audio recording display by pressing the + or - button, then press the SET button.

  • Page 43: Special Day Timer

    Special Day Timer External Program Timer Before programming this table, confirm that the Program The internal timer can be changed to the specified timer Timer is programmed completely. previously programmed by the input from the external This table allows for up to 30 days to be defined as special timer.
  • Page 44 2. Move the cursor to the TIMER REC MODE parameter in NORMAL: For normal image quality (Compression Rate the menu by pressing the D or C button. 1/16) EXTENDED: For extended time recording quality 3. Select the recording time mode to be set by pressing (Compression Rate 1/25) the + or - button.

  • Page 45: Multi Shot Recording (Internal Timer)

    Multi Shot Recording (Internal NORMAL: For normal image quality (Compression Rate 1/16) Timer) EXTENDED: extended recording quality (Compression Rate 1/25) As described before, the Multi Shot Recording is an event recording function reacting to an alarm input. The factory default setting is SUPER FINE. It records the number of images in pre- and post-recording.

  • Page 46: One Shot Recording (Internal Timer)

    One Shot Recording (Internal Timer) 4. Move the cursor to the PICTURE parameter by pressing the D or C button, then select the number of freeze As described before, the One Shot Recording is an event images to be recorded by pressing the + or - button. recording function reacting to an alarm input.

  • Page 47: Emergency Recording (Time Lapse Recording)

    21 of the CONTROL port located on the rear of the ing rate by pressing the + or - button. Disk Recorder. 1. Move the cursor to EMERGENCY in the WJ-HD500 1 - 30FPS: Records the selected number of freeze SETUP menu by pressing the D or C button.

  • Page 48: Multiplexer Setup

    The menu shown below appears on the monitor screen. 2. Select an item or item parameter in the menu by press- ing the D or C button. 5-1-1 MULTI LIVE SEQUENCE SETUP 3. To return to the WJ-HD500 SETUP menu, press the SET PRE- PRE- UP/ESC button.
  • Page 49 Note: To assign the parameters 1 - 64, the specified 5-1-2 MULTI QUAD PATTERN SETUP combination cameras in the system are equipped AREA CAM AREA CAM with a PS Data* mode. 4A-1 AC-1 4A-2 AC-2 4A-3 AC-3 4A-4 AC-4 5. Move the cursor to the SEC editing area by pressing 4B-1 AD-1 the B button, then select the desired dwell time by...

  • Page 50: Sequence Setup (Spot Monitor)

    Group Multi Sequence Setting Sequence Setup (Spot Monitor) As described before, the cameras are assigned to 4 This item lets you program the live sequence pattern to be groups for recording with a programmed internal timer. run on the Spot Monitor. This item lets you select the sequence pattern to be dis- Live sequence is a series of 16 steps assigned to the Spot played of each group on the Multiscreen Monitor.

  • Page 51: Power On Status Setup

    6. Repeat the above steps 2 to 5 to set up the other pat- Power on Status Setup terns. The items let you select a pattern on the monitor screen when the Disk Recorder’s power is turned on. 7. When satisfied with all of the above steps, press the SET UP/ESC button to return to the previous SEQUENCE SETUP menu.

  • Page 52: Secret View Setting

    Secret View Setting When the video input is displayed in the spot mode on the Spot Monitor, the Multiscreen Monitor is enabled to skip the step in sequence or display a blackout in multiscreen for that selected input image. This function is called Secret View and the item lets you enable or disable this function on the Multiscreen Monitor.

  • Page 53: Alarm Setup

    ALARM SETUP 1. Move the cursor to ALARM SETUP in the WJ-HD500 4. Move the cursor to the INPUT editing area by pressing SETUP menu by pressing the D or C button, then the B button, then select the type of contact to meet the system requirement by pressing the + or - but- press the SET button.

  • Page 54: Alarm Buzzer Setting

    Alarm Buzzer Setting 3. Move the cursor to VMD AREA SETUP in the ALARM SETUP menu by pressing the D or C button, then This item lets you select the ringing duration of the built-in press the SET button. alarm buzzer when an alarm is activated. The VMD AREA SETUP table shown below appears on the monitor screen.

  • Page 55: Alarm Mode On Multiscreen Monitor

    6. Move the cross pointer on the screen to the starting Alarm Mode on the Multiscreen point for the area by pressing the A, B, D or C but- Monitor ton, then press the SET button. This item lets you select the mode for displaying an alarm on the Multiscreen Monitor.

  • Page 56: Display Setup

    The characters shown below can be selected in display position on the monitors. sequence. 1. Move the cursor to DISPLAY SETUP in the WJ-HD500 Numeral: 0 1 2 3 4 5 6 7 8 9 SETUP menu by pressing the D or C button, then Alphabet: A to Z, a to z Symbols: ←...

  • Page 57: Title Display Setting (Spot Monitor)

    Title Display Title Display Setting (Spot Monitor) This item lets you enable or disable the display of the cam- This item lets you enable or disable the display of the cam- era and group title on the Multiscreen Monitor. era and group title on the Spot Monitor. 1.

  • Page 58: Clock And Status Display Position Setting

    Clock and Status Display Position Title Display Position Setting Setting This item lets you select the position where the title display is placed on the Spot and Multiscreen Monitor. This item lets you select the positions where the clock and status displays are placed on the Multiscreen Monitor.

  • Page 59: Communication Setup

    3. To return to the previous setup menu, press the SET 1. Move the cursor to COMMUNICATION SETUP in the UP/ESC button. WJ-HD500 SETUP menu by pressing the C or D but- ton, then press the SET button. The COMMUNICATION SETUP menu shown below appears on the monitor screen.
  • Page 60 Parity Check OFF: Select this parameter if the system controller is not connected to the system. This item lets you set the parity bit for RS-485 communica- 0S: Each time an alarm is received, it is transmitted to tion. the system controller. 1S: The received alarm is stored for 1 second, and that 1.

  • Page 61: Rs-232C Setup

    RS-232C Setup Baud Rate This item lets you set the transmission speed for RS-232C These items let you set the parameters for communication communication. between the SERIAL port of the Disk Recorder and an external device. 1. Move the cursor to the BAUD RATE parameter by pressing the D or C button.

  • Page 62: Network Setup

    Stop Bit Network Setup This item lets you set the number of stop bits for RS-232C When the optional Network Interface Board is installed in communication. the Disk Recorder, the Disk Recorder can be controlled from a Client PC via the Ethernet Hub. 1.

  • Page 63: System Setup

    CLOCK. 1. Move the cursor to SYSTEM SETUP in the WJ-HD500 Note: The date and time are updated when the SET SETUP menu by pressing the C or D button, then UP/ESC button is pressed.

  • Page 64: Password Lock Setting

    Password Lock Setting Buzzer Setting The system setup and operations can be password protect- This item lets you enable or disable the buzzer sound ed to prevent a malfunction of the system due to accidental accompanying operation of the Disk Recorder’s buttons. erasure of data, alteration of settings or erroneous opera- tions by unauthorized persons.

  • Page 65: Disk Management

    4. Select either YES or NO by pressing the + or - but- 2. Select an item or item parameter in the menu by press- ing the D or C button. ton. Select YES, then press the SET button to execute the 3.

  • Page 66: Error Report

    Error Report There are 100 error records stored in chronological order in 10 pages of tables. 1. Move the cursor to ERROR REPORT in the SYSTEM SETUP menu by pressing the C or D button, then press the SET button. The ERROR REPORT table appears on the monitor screen, as shown below.

  • Page 67: Operating Procedures

    OPERATING PROCEDURES...

  • Page 68: Controlling The Video Input And Monitors

    CONTROLLING THE VIDEO INPUT AND MONITORS Controlling the Spot Monitor Single Sequence (Live) A series of camera images can be displayed in succession The operations descried below are available on the Spot on the monitor screen for the specified duration. Monitor.

  • Page 69: Controlling The Multiscreen Monitor

    Controlling the Multiscreen Monitor 3. To select another image, press a numeric button (1 - 16) corresponding to the image. The operations descried below are available on the The selected image appears on the monitor screen. Multiscreen Monitor. The indicator on the button previously selected turns off and the indicator on the button currently selected lights Selecting the Multiscreen Monitor 1.
  • Page 70 Single Sequence (Live) Notes: • You can also enable the Auto Skip function to skip A series of camera images can be displayed in succession any steps when no video signal is present. on the monitor screen for the specified duration. Refer to AUTO SKIP in the 5 - 1 SEQUENCE SETUP Refer to the 5 - 1 - 3 SPOT LIVE SEQUENCE SETUP for fur- for further details.
  • Page 71 4. During the sequence, press the SEQUENCE button to Multiscreen Spot (Live) pause the sequence that is being run on the monitor The monitor can display the camera images on a 4, 7, 9, screen. 10, 13 and 16 multiscreen shown below. The indicator in the button blinks to indicate that the sequence is paused.
  • Page 72 <All Input Display with Quad Shift On> Multi Sequence (Live) A series of camera images can be displayed in succession on the monitor screen for the specified duration. Each sequence step can be combined with four screen 9 10 11 12 segments (quad) and single image.
  • Page 73 Group Multi Sequence 3. During the sequence, press the SEQUENCE button to pause the sequence that is being run on the monitor The assigned group camera images can be displayed in screen. succession on the monitor screen for the specified dura- The indicator in the button blinks to indicate that the tion.

  • Page 74: Alarm Control Function

    When an alarm signal is received, the Disk recorder, Spot “CH LOSS” is displayed on the monitors. Output and Multiscreen Output of the Disk Recorder are activated as shown below. Refer to the ALARM SETUP menu of the WJ-HD500 SETUP menu for further settings. CAM1 ALARM Front Panel Display When an alarm function is activated, the ALARM indicator and corresponding camera input button (1 to 16) blink.

  • Page 75: Alarm Reset

    Alarm Reset Alarm Suspension This function disables the activation of the alarm link and Manual Reset instead enables storing of any alarm activated in the alarm log. When the alarm is activated, the ALARM indicator blinks. It is used to suspend the alarm link during the Disk The indicator keeps blinking until all alarms are cleared by Recorder’s setup.

  • Page 76: Recording

    The reservations are made in the TIMER REC SETUP menu, The following procedure describes how to record manually and the TIMER parameter is set to INT in the WJ-HD500 in the selected mode. SETUP menu.

  • Page 77: Alarm Recording

    Alarm Recording for Manual and Power-on Recording The Disk Recorder records an alarm status based on the setup made in the MANUAL REC SETUP menu of the WJ-HD500 SETUP menu. It records the images as shown below in Time Lapse Recording mode with the specified recording rate, quality and duration.

  • Page 78: Emergency Recording

    Alarm Recording for Timer Modes As described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording. Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there is no difference compared to an alarm recording.

  • Page 79: Playback

    PLAYBACK The recorded images on the disk can be played back on • Forward or Backward search the Multiscreen Monitor. The recorded images can be searched playing back at The procedures described below are for operations playing variable speeds. back the hard disk. During playback or playback pause, hold down the Refer to the PLAYBACK MODE or THUMBNAIL parameter Shuttle Ring clockwise or counterclockwise to search...

  • Page 80: Search Record Function

    • Jump search Search Record Function The recorded images can be searched by jumping to The Disk Recorder has two search functions. the next recording from the currently selected record The procedures below describe how to search and play number. back records.

  • Page 81: Display On The Monitor

    4. Press the DISPLAY button to display the record list with Display on the Monitor the search (SEARCH) editing area as shown above. The procedures described below are an example display- ing the playback on the Multiscreen Monitor. Single and Multiscreen Spot (Playback) DISPLAY 1.
  • Page 82 Zooming Single Spot (Playback) Displaying Camera and Playback Image While the image on the monitor screen is displayed in One segment of the multiscreen for camera images can be Single Spot mode, the image can be zoomed following the assigned to playback. procedure below.

  • Page 83: Backup Function

    BACKUP FUNCTION The recorded images in the Disk Recorder can be stored 5. Move the cursor to the position to be edited in the search editing area by pressing the A, or B button. on the DVD-RAM disk by copying the selected records when the system is equipped with the DVD Drive Unit.

  • Page 84: Data Erase Function

    The ERASE menu as shown below will appear on the monitor screen. Auto Erase Function 1. Press the SET UP/ESC button for two seconds or more, the WJ-HD500 SETUP menu as shown below appears 9-3-2 ERASE on the screen of the Multiscreen Monitor. AUTO ERASE OFF...

  • Page 85: Manual Erase Function

    Manual Erase Function 5. When the erase is completed, “DONE!” appears on the lower-center in the menu. 1. Repeat the procedures until the ERASE menu is dis- played on the monitor screen for auto erase. 9-3-2 ERASE AUTO ERASE OFF 9-3-2 ERASE ERASE DATA BEFORE SEP12.00 AUTO ERASE OFF...

  • Page 86: Appendix

    Multiscreen Monitor . switch. 2. Turn on the Disk Recorder by pressing the POWER switch while holding down the A and Bbuttons. All settings in the WJ-HD500 SETUP menu are reset to the factory default settings. LOCK PASSWORD>–––––...

  • Page 87: Specifications

    SPECIFICATIONS General Power Source: 120 V AC, 60 Hz Power Consumption: 58 W Ambient Operating Temperature: +5°C - +45°C (41°F - 113°F) Ambient Operating Humidity: Less than 85 % Dimensions: 420 mm (W) x 88 mm (H) x 350 mm (D) 16-9/16”...
  • Page 88 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electricof Puerto Rico Inc.

Table of Contents