Custom Setting - Konica Minolta SL1000 Microfiche User Manual

SL1000 User's Guide
3. Ask Before Output
4. White Balance
5. Color Correction
6. ICC Profile
7. Auto Contrast
8. Digital GEM

9. Custom Setting

10. E-Mail Setting
11. Manual Switch
12. Put the Scanner to
Sleep
13. Turn OFF the
Scanner
3-36
It displays on the confirmation screen before the scan image is output
when "The scan image is displayed" is "ON".
For Scan to File
The correction of the white balance is set.
There are two selections available (Manual and Auto).
The correction of the color reproduction for the color image is set.
There are three selections available (Non, Standard and Color
Management).
The ICC Profile is selected.
When the monochrome film is set, the image contrast is automatically
corrected.
The graininess of the film is decreased.
It is effective for the image quality reproduction of negative film.
The film and toolbar are set by each custom profile in Custom Setting.
 3.7 Custom Setting
Settings related to E-mail transmissions are available.
 3.9
E-Mail Setting
When the Manual Switch (option) is used, the operation is set.
The setting can be selected from "Scan to File" or "Scan to Print".
The time that should elapse when no operation is performed before the
device enters Sleep Mode.
It can be selected according to 7 selections (5 Minutes, 15 Minutes, 30
Minutes, 60 Minutes, 2 Hours, 3 Hours and 4 Hours).
The time that should elapse when no operation is performed in Sleep
Mode before the Power Supply is turned OFF.
It can be selected according to 4 selections (60 Minutes, 2 Hours, 3
Hours and 4 Hours).
Scan to Print