Toolbar - Konica Minolta SL1000 Microfiche User Manual

3.1

Toolbar

to VIEW Mode
Film Selection
Auto Focus
Film Polarity
Zoom In
Zoom Out
Rotate CCW
Rotate CW
Horizontal Flip
It changes from the SCAN Mode to the VIEW Mode.
The Film Selection screen is displayed.
 3.2 Film Selection
It is automatically adjusted to the best focus.
It may not function correctly due to the
NOTE !

condition of the film (density, contrast, and
image pattern). In this case, adjust it manually.
The polarity of the film ("Positive film" or "Negative film")
is selected.
The Scanner performs the zoom operation so that the
magnification display is adjusted as long as button is
depressed.
The Scanner shifts to an electronic zoom when the upper
bound of the optical zoom is exceeded and does the
magnification operation.
The Scanner does the zoom operation like wide-ranging
being displayed as long as button is depressed.
Whenever the button is pushed, the image is rotated 90
degrees counterclockwise.
Whenever the button is pushed, the image is rotated 90
degrees clockwise.
Whenever the button is pushed, the image reverses right and
left.
It changes into the picture that reverses the
NOTE !

icon for the reverse image.
Chapter 3 SL-Touch for SL1000
3-17