Scan Mode Screen - Konica Minolta SL1000 Microfiche User Manual

3 SCAN Mode Screen

The image is displayed on the application screen. This mode enables you to read the image and set
various functions.
Listed below is an explanation of the functions that can be set in SCAN Mode.
3
1. Scan Window
2. Cropping Area
3. Toolbar
The scanning image is displayed.
While the film is moving, animation (Follow to movement) is displayed.
Moreover, when the film stops, the still picture (Read by high resolution)
is displayed.
The image arbitrarily displayed by the zoom operation of
NOTE !

the Touch Panel can be magnified and be reduced for
the multi touch environment.
The area to the output file and the output printer is selected, and
displayed. The size of the Cropping Area changes if a quadrangle in four
corners and all sides is dragged.
NOTE ! The Cropping Area set within the selection crop size

range is output when the fixed form size (Excluding
Custom) has been selected by "Output setting",
The Cropping Area is not changed at the zoom. Please

return to normal display pressing "Fit", and execute it.
The application and the Scanner are operated and set.
 3.1
Toolbar
There is no menu bar in this application.
NOTE !

All are operated with buttons on the toolbar.

The button displayed on the tool bar can be changed.

Chapter 3 SL-Touch for SL1000
1
2
4
5
3-15