Installation The Application Software And The Driver Software - Konica Minolta SL1000 Microfiche User Manual

1.3

Installation the Application Software and the Driver Software

NOTE ! Must install "SL-Touch for SL1000" before connecting the Scanner.
When the Scanner is connected before "SL-Touch for SL1000" is installed,
"Found New Hardware Wizard" is displayed.
In this case, please end the wizard clicking the cancel button.
The driver is installed concurrently with the application.
The following procedure shows the Application Installation for Windows 7.
Administrative rights are needed for the Application Installation.
NOTE : Screens may differ slightly depending on the Windows version.
1
Load the installation CD-ROM in the CD-ROM drive of the Personal Computer. The Auto
Play screen will automatically appear. Click "Run launcher.exe".
NOTE ! When the "Auto Play" function of the computer is "OFF", this screen will not be
displayed. Please execute launcher.exe in the CD-ROM and start.
Chapter 3 SL-Touch for SL1000
3-3