Konica Minolta SL1000 Microfiche User Manual page 111

When the 16 mm/35 mm Roll Film (Open-Reel) is used.
1
Insert the Axis of the Attachment B into the hole of the Drive Shaft.
Drive Shaft
2
Insert 2 Pins of the Attachment B in the Notches of the Drive Shaft.
NOTE ! The position of Pins is adjusted so that Attachment Pins may surely connect it
with Notches.
Notch
Drive Shaft
Notch
NOTE ! The Drive Shaft and the Attachment B are attracted and held together by a
magnet. When the Attachment B is removed, the head of the Attachment B is no
longer attracted by the magnet, and it detaches.
Axis
Attachment B
Pin
Pin
Attachment B
Chapter 4 Operation
4-21